Friday, June 5, 2009

Conclusions and Helpful Links

Continued from Installing the Hardware

That's pretty much it. Just plug it up and give it a shot. If you find that any of your buttons are acting funny, e.g. nothing happens when you press the button until you let go, try swapping the locations of the wires around on the button (i.e., move the wire from the bent post to one of the straight ones and vice versa).

Once again, here's what the final product looks like:


I've presented my own experience here, but there are tons of others' experiences elsewhere online. The Shoryuken.com forums have some really great info on pad hacking and DIY stick-making. You can also find some great things at the arcadecontrols.com forums (HarumaN is an expert and sells pre-hacked pads at reasonable prices) and xbox-scene.com forums (RDC has some great, thorough information about pad hacking, along with some good tutorials on how to salvage pads after a screw-up).

Gamingnow.net sells damn-near anything a stick-builder could want, all at very reasonable prices.

MAMErs can purchase I-PAC interfaces from Ultimarc. Another option that seems to be preferred on the Shoryuken forums is the Cthulhu board, which can be purchased at gamingnow.net.

UPDATE: even better than the Cthulhu is Toodles' new Chimp board, which provides PC/PS3 support and is designed to accept a hacked 360 common ground pad to provide 360 support with automatic switching among protocols. Plus, it's cheaper than bare Cthulhus used to be! You can get it and other stick materials at Lizard Lick.

UPDATE 3/25/11: Even better than the Chimp board, now you can get the Akishop PS360 triple-mod board, which is a no-solder board that supports PS3, Xbox 360 and PC all at once. It costs slightly more (~$45), but it completely removes padhacking from the equation for the first time ever. This and other arcade stick parts intended for fighting game enthusiasts are available at focusattack.com.

If you want to build a standard, semi-low-profile stick similar to what you would buy in a store, I recommend checking out some of the articles on slagcoin.com. The site has TONS of great information about all aspects of stick-making, and their button layout section is unparalleled.

You can learn more about sticks--including the differences between various brands--here. The section about restrictor plates should be considered required reading for any aspiring stick-jockey.

Page 1: Building an Arcade-style Fight Stick
Page 2: Assembling Your Box
Page 3: Pad Hacking
Page 4: Installing the Hardware
Page 5: Conclusions and Helpful Links

No comments:

Post a Comment