How to Compile HandBrake GTK GUI from SVN

UPDATE (3/4/09): These directions no longer work on code checked out from the SVN. I've left them here for future reference (and for folks attempting to build the stable 0.9.3 code), but updated build instructions are available here.

Update (5/15/09): I have working binaries available in my PPA repository. Directions for adding it to your package manager are available here.

This information has been gleaned from my and others' posts on the ubuntu forums. I have reproduced it here for ease of access and to avoid having to read all 14+ (at the time of this writing) pages of that thread. This process requires at least a standard Intrepid Ibex (8.10) Ubuntu installation, but it can certainly be adapted for other distros (users of OpenSuSE will need to download the additional dependencies zypper and in to build the CLI, as well as gtkhml2 and gtkhtml2-devel to build the GUI). If you just want precompiled binaries, see my post here.

Update (11/9/08): there's a new dependency added as of the last couple of days: libgtkhtml3.14-dev. I added it to the list, but be sure you install it if you've suddenly run into problems. Update (11/24/08): 2 more dependencies--libgstreamer0.10-dev and libgstreamerplugins-base0.10-dev. Update (2/2/09): another dependency--libdbus-glib-1-dev

Step 1: download the dependencies (in a terminal, type):

sudo aptitude install libgtk2.0-dev libglib2.0-dev libhal-storage1 libhal-storage-dev libhal-dev automake build-essential jam libtool subversion zlib1g-dev libbz2-dev lib64bz2-1.0 libbz2-1.0 xmlto texinfo subversion gfortran doxygen libsdl1.2-dev gfortran-multilib gcc-multilib g++-multilib libesd0-dev libgtk1.2-dev libfftw3-dev electric-fence linux-kernel-devel libgtkhtml3.14-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev yasm intltool libdbus-glib-1-dev

Step 2: install libdvdcss2 from the medibuntu repository (all on one line):

sudo wget http://www.medibuntu.org/sources.list.d/hardy.list -O /etc/apt/sources.list.d/medibuntu.list

then type (again, all on one line):

wget -q http://packages.medibuntu.org/medibuntu-key.gpg -O- | sudo apt-key add - && sudo apt-get update

and finally:

sudo aptitude install libdvdcss2

Step 3: check out the latest HandBrake code from the project's SVN repository:

svn co svn://svn.handbrake.fr/HandBrake/trunk HandBrake

Step 4: navigate to the newly created HandBrake directory:

cd HandBrake

Step 5: compile the HandBrakeCLI binary:

make

Step 6: navigate to the gtk directory:

cd gtk

Step 7: prepare the source to compile the GUI against the newly built CLI binary:

./autogen.sh

Step 8: compile and install the GUI:

make && sudo make install

This should add all the relevant menu shortcuts and so forth on a standard Ubuntu install. Leave me a comment if you have any questions/problems and I'll try to help.